Skip to content

Lesson 17 ยท Reaction Rates

Integrated Rate Laws and Half-Life

Use integrated rate laws to find concentration at any time, identify reaction order from linear plots, and calculate half-lives for zero-, first- and second-order reactions.

A rate law tells you the rate at one instant. Often you want to know how much reactant is left after 5 minutes, or how long until half of it has gone. For that you need the integrated rate law: an equation for concentration as a function of time. (It comes from integrating the rate law with calculus; here we use the results.)

The three integrated rate laws

For a reaction A โ†’ products with a single reactant:

Order Rate law Integrated form Straight-line plot Slope Half-life
0 rate = k [A] = [A]โ‚€ โˆ’ kt [A] vs t โˆ’k tยฝ = [A]โ‚€ / 2k
1 rate = k[A] ln[A] = ln[A]โ‚€ โˆ’ kt ln[A] vs t โˆ’k tยฝ = ln 2 / k = 0.693 / k
2 rate = k[A]ยฒ 1/[A] = 1/[A]โ‚€ + kt 1/[A] vs t +k tยฝ = 1 / (k[A]โ‚€)

Here [A]โ‚€ is the initial concentration. The first-order law can also be written [A] = [A]โ‚€ e^(โˆ’kt).

Half-life

The half-life tยฝ is the time for the concentration to fall to half its value.

  • First order: the half-life does not depend on the starting concentration. After one half-life, half remains; after two, a quarter; after three, an eighth. Radioactive decay and many drug eliminations follow this pattern. For carbon-14, tยฝ = 5730 years.
  • Zero order: the half-life is proportional to [A]โ‚€; it shortens as the reactant is used up.
  • Second order: the half-life is inversely proportional to [A]โ‚€; it lengthens as the reactant is used up.

Worked example 1: first order

A first-order reaction has k = 0.0231 sโปยน.

  • Half-life: 0.693 / 0.0231 = 30.0 s.
  • Fraction left after 90 s: 90 s is 3 half-lives, so (1/2)ยณ = 0.125. Check: e^(โˆ’0.0231 ร— 90) = e^(โˆ’2.079) = 0.125.
  • Time for [A] to fall from 0.80 M to 0.10 M: ln(0.80/0.10) = ln 8 = 2.079, so t = 2.079 / 0.0231 = 90 s.

Worked example 2: second order

A second-order reaction has k = 0.50 Mโปยน sโปยน and [A]โ‚€ = 0.20 M.

  • Half-life: 1 / (0.50 ร— 0.20) = 10 s.
  • Concentration after 30 s: 1/[A] = 1/0.20 + 0.50 ร— 30 = 5.0 + 15 = 20 Mโปยน, so [A] = 0.050 M.

Worked example 3: zero order

A zero-order reaction has k = 2.0 ร— 10โปยณ M/s and [A]โ‚€ = 0.40 M. It runs out in 0.40 / 0.0020 = 200 s; the half-life is 0.40 / (2 ร— 0.0020) = 100 s.

Python Concentration and half-life for each order

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Finding the order from data

If you measure [A] at several times, you can test which of the three plots is a straight line:

  • [A] vs t straight โ†’ zero order.
  • ln[A] vs t straight โ†’ first order.
  • 1/[A] vs t straight โ†’ second order.

The slope gives k (with the sign noted in the table). The data below are simulated from a first-order model with k = 0.0231 sโปยน, not measured, to show how the test works. Real data would carry some scatter.

Python Which plot is a straight line?

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

An rยฒ close to 1 for the ln[A] plot (and clearly lower for the others) points to first order. With real data, compare all three and choose the straightest, ideally over at least two or three half-lives.

Pseudo-first-order reactions

If a reaction is rate = k[A][B] but B is present in huge excess, [B] is practically constant. Then rate = k'[A] with k' = k[B], and the reaction behaves as first order in A. Chemists use this trick to study complicated rate laws one reactant at a time.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. A first-order reaction has k = 0.0462 sโปยน. What is its half-life?

    tยฝ = 0.693 / 0.0462 = 15.0 s.
  2. 2. For a first-order reaction, the fraction remaining after 3 half-lives is

    Each half-life halves the amount: (1/2)ยณ = 1/8.
  3. 3. A plot of 1/[A] against time is a straight line with positive slope. The reaction is

    The integrated second-order law is 1/[A] = 1/[A]โ‚€ + kt, a line with slope +k.
  4. 4. Which reaction order has a half-life that does NOT depend on the initial concentration?

    For first order, tยฝ = ln 2 / k, which contains only k.

Summary

  • Zero order: [A] = [A]โ‚€ โˆ’ kt; first order: ln[A] = ln[A]โ‚€ โˆ’ kt; second order: 1/[A] = 1/[A]โ‚€ + kt.
  • Half-lives: [A]โ‚€/2k (zero), 0.693/k (first), 1/(k[A]โ‚€) (second).
  • The order can be identified by which of the three plots is linear.
  • First-order half-life is constant, so decay follows halving: 1/2, 1/4, 1/8, โ€ฆ
  • Excess of one reactant gives a pseudo-first-order reaction.

Next: Collision Theory and Activation Energy